if(node is 1 and tick and num_pkts_sent < num_pkts[node])//产生DATA分组(随便写个,我只想要个参考)pkt = (PKT_PTR) malloc(sizeof(PKT));pkt->type = /* */;pkt->seq_no = /* */;pkt->source = /* */;pkt->dest = /* */; pkt->size = /* */;if (

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/03 23:07:11
if(node is 1 and tick and num_pkts_sent < num_pkts[node])//产生DATA分组(随便写个,我只想要个参考)pkt = (PKT_PTR) malloc(sizeof(PKT));pkt->type = /* */;pkt->seq_no = /* */;pkt->source = /* */;pkt->dest = /* */; pkt->size = /* */;if (

if(node is 1 and tick and num_pkts_sent < num_pkts[node])//产生DATA分组(随便写个,我只想要个参考)pkt = (PKT_PTR) malloc(sizeof(PKT));pkt->type = /* */;pkt->seq_no = /* */;pkt->source = /* */;pkt->dest = /* */; pkt->size = /* */;if (
if(node is 1 and tick and num_pkts_sent < num_pkts[node])
//产生DATA分组(随便写个,我只想要个参考)
pkt = (PKT_PTR) malloc(sizeof(PKT));
pkt->type = /* */;
pkt->seq_no = /* */;
pkt->source = /* */;
pkt->dest = /* */;
pkt->size = /* */;
if (node is 2 and receivedata)
{
//直接将从1号节点处收到的Data分组转发给3号节点
}
//如果该tsource函数是在3号节点上执行,且已经收到了2号节点转发来的Data分组
else if (node is 3 and ack)
{
//产生ACK分组
//将该ACK分组回送给1号节点
}
来人啦

if(node is 1 and tick and num_pkts_sent < num_pkts[node])//产生DATA分组(随便写个,我只想要个参考)pkt = (PKT_PTR) malloc(sizeof(PKT));pkt->type = /* */;pkt->seq_no = /* */;pkt->source = /* */;pkt->dest = /* */; pkt->size = /* */;if (
pkt = (PKT_PTR) malloc(sizeof(PKT));
pkt->type = DATA;
pkt->seq_no = seq_no ++;
pkt->source = 1;
pkt->dest = 2;
pkt->size = 10;
sendm(sink,0,pkt); line_busy = 1;
receivedata= 0;
pkt = (PKT_PTR) malloc(sizeof(PKT));
pkt->type = ACK;
pkt->seq_no = seq_no ++;
pkt->source = 3;
pkt->dest = 1;
pkt->size = 10;
sendm(sink,0,pkt);
line_busy = 1;
ack=0;

if(node is 1 and tick and num_pkts_sent < num_pkts[node])//产生DATA分组(随便写个,我只想要个参考)pkt = (PKT_PTR) malloc(sizeof(PKT));pkt->type = /* */;pkt->seq_no = /* */;pkt->source = /* */;pkt->dest = /* */; pkt->size = /* */;if ( 求这段英文翻译 Your confession remains to be my final pleading,  But the only thing that’s here with me   is tic tac tic tac tic tac tic tac 求翻译 关于计算机方面的The bound given in Theorem 1 is tight. Consider any star Kl,-l in which every node isinitially 1. If every leaf moves, there will there will be exactly n - 1 moves. The expression to the left of the equals sign is not a valid target for an assignment.function final=disjkstra(A,x,y)% A = adjacency matrix of the graph(includes point x and y)% x = intial node % y = terminal node A(A= =0)=NaN;IN=x;s=zeros(1,Length(A policy-based-route p1,permit node 1 if-match acl 3000,apply ip-address next-hop 123.233.243.127 英语翻译All nodes check if its energy is more than its neighbors’.It adds 1 to its vote (initial value is 0) once it finds there is one node whose energy is less than its own.The rest messages should be checked in the same manner.Ultimately eac 英语翻译求段英文翻译 Your confession remains to be my final pleading,But the only thing that’s here with me is tic tac tic tac tic tac tic tac 邓紫棋AINY的最后一句英文什么意思Your confession remains to be my final pleading,but the only thing that’s here with me is tic tac tic tac tic tac tic tac.完整一点、谢谢 关于typedef struct node这一段每一句什么意思?typedef struct node{struct node *next;Buch i;}Node;Node * New_Node(void){Node * newNode;newNode = (Node*)malloc(sizeof(Node));if( newNode =NULL){newNode->next = NULL;memset(&newNode->i,0,sizeof( 英语题!救命啊!快!1.busy(反义词)2.May I go _ a walk,Mum? (根据句意填空) Yes,you may.3.改错:(1).He is packing his suitcase to his clothes.(2).May I come on a trip in Shijiazhuang?(3).Everyone goes to the station and buy tic matlab问题:tic,toc是什么东西,怎么用的tic, s=0; for i=1:100000, s=s+1/2^i+1/3^i; end; toc这样的一个语句,为什么每次的到的结果不同Elapsed time is 0.189000 seconds.Elapsed time is 0.210000 seconds.Elapsed time is 0.196000 求教,ansys接触分析出现的警告提示?最后紫色线在青色线上方.算是收敛了吧1,Volume 85 is being meshed entirely with SOLID45 tetrahedra, which can be much less accurate than bricks. Use quadratic (10-node) tetrahedra if availab ansys中“there is no node definition”怎么办 计算机英译汉第一句 The copies are processed in DFS order,i.e.,when expansion of the current node and its successorsare finished,the expansion of the second copy and its successors is started.第二句 The algorithmis listed in Figure 1 in a Q6:Ifσ is unknown,and n interest什么意思A glitch will be called negative(positive) if the steadystate voltage level at line/node of interest is logic ONE(logic ZERO)上句话中的interest是什么意思 有关电路的 protel99se 为什么会提示node not found为什么会出现这样的提示,13:New Node Add node Z1-1 to net NetZ1_1 Error:Node not found Macro 14:New Node Add node D1-1 to net NetZ1_1 Error:Node not found c语言一道单向链表的改错题,例如输入1234560,则输出1,2,3,4,5,6.#include #include#includetypedef struct node{ int data; struct node *next;}NODE;#define LEN sizeof(NODE);NODE *setup(){ NODE *head=NULL,*p1,*p2; int n=0; p2=(NODE*)malloc(