请帮我翻译成英文,不要机器翻译的,要求语法正确.在全球能源紧缺,气候变化日益显著的情况下,节能减排成为各国政府高度重视的应对措施.而照明节能减排被国际社会公认为是实施能源可持

来源：学生作业帮助网编辑：作业帮时间：2024/04/29 04:38:44

请帮我翻译成英文,不要机器翻译的,要求语法正确.在全球能源紧缺,气候变化日益显著的情况下,节能减排成为各国政府高度重视的应对措施.而照明节能减排被国际社会公认为是实施能源可持
请帮我翻译成英文,不要机器翻译的,要求语法正确.
在全球能源紧缺,气候变化日益显著的情况下,节能减排成为各国政府高度重视的应对措施.而照明节能减排被国际社会公认为是实施能源可持续发展的成功范例.
目前全球的照明消耗了8.9%的能源及19%的电力.根据美国能源部及Sandia国家试验室的研究报告,随着半导体照明技术的发展,照明的能耗和成本将大幅下降.因此LED产业成为节能减排政策鼓励发展的产业.
目前LED在建筑景观照明和显示等领域得到了成功应用,已开始涉足普通照明和路灯等领域,2008年,已经有十多万盏LED路灯应用于示范工程,市内公共区域照明也已经开始示范应用.北京市先后在左安门和辟才胡同试点LED路灯,路灯管理中心通过一年半的跟踪测试,LED在同样照明效果的情况下,耗电量是白炽灯泡的八分之一,荧光灯管的二分之一,可节能40%左右.但由于LED没有配光,照度均匀性等方面还有待进一步改进.通过对其他LED路灯工程的跟踪调研发现,除存在上述问题外,由于没有适用于LED路灯照明的标准,LED路灯质量和照明效果都存在良莠不齐的情况,因此选择高性能LED并科学合理的设计LED灯成为一项重要课题.而且由于LED技术发展很快,产品性能不断提高,如何通过照明设计使LED产品的性能得到充分发挥也是达到更好节能效果的重要环节.
目前我国还没有关于LED产品的标准,产品质量参差不齐,选择性能符合要求的产品及应用这些产品达到要求的照明效果是LED道路照明的关键所在,因此需要产品测试的保证及现场测试的验证,并从而比较传统路灯与LED路灯系统的能耗量,为LED路灯的照明设计及LED路灯的推广应用提供切实合理的建议,同时推动LED产业的健康发展.

请帮我翻译成英文,不要机器翻译的,要求语法正确.在全球能源紧缺,气候变化日益显著的情况下,节能减排成为各国政府高度重视的应对措施.而照明节能减排被国际社会公认为是实施能源可持
The energy shortage in the global climate change, and growing significantly, under the situation of energy conservation and emission reduction has become a government attaches great importance measures. While saving lighting in the international society for implementing the sustainable development of energy.
Current global illumination consumes 8.9% of energy and 19 percent of electricity. According to the U.S. department of energy and Sandia national laboratories research report, along with the development of technology of semiconductor lighting, lighting consumption and cost will drop significantly. Therefore LED industry has become a saving energy policy to encourage the development of industry.
At present, the LED display in landscape architecture lighting and etc, has applied successfully in general lighting and lamp etc, in 2008, has more than ten thousands of LED lights applied in public area, city demonstrative project application demonstration has also begun lighting. Beijing has only door and monarch in zuoanlu pilot LED lamp, street alley management centre half a year by the same test, LED lighting effect in the circumstances, power consumption is the incandescent light bulb one-eighth of fluorescent tubes, one half of energy, but by around 40%. But because no light, LED illumination uniformity etc remains. Based on other projects tracking investigation LED lamp, except that the question, because no applicable standards of lighting, LED lamp LED lamp lighting effects are quality and the good and bad are intermingled, so choose high scientific and rational design of LED lights LED to become an important topic. And because LED technology develops fast, continuously improve product performance, how to pass that LED lighting design product performance to achieve better adequately is the important link of the energy saving effect.
China is not about standard of LED products, product quality is uneven, select the performance requirements of product and application of these products to meet the requirements of lighting effect is LED lighting is the key to the test, so product guarantee and the field test, and then compared with the traditional LED lamp, street system for LED lamp energy of lighting design and LED lamp application provides some reasonable Suggestions, and promote the healthy development of the industry LED.

全部展开

scarce in the global energy, in the climatic change remarkable situation, the energy conservation reduces the platoon to become the counter measures which day by day various countries' government takes seriously. But illuminates the energy conservation to reduce the row to recognize by the international society for is implements the energy sustainable development the successful model. the present whole world's illumination has consumed 8.9% energy and 19% electric powers. According to the United States Department of Energy and the Sandia country test chamber's memoir, along with the semiconductor lighting techniques' development, the illumination energy consumption and the cost will drop largely. Therefore the LED industry becomes the energy conservation to reduce the industry which a row of policy encourages to develop. present LED in construction domains and so on landscape illumination and demonstration obtained the success application, started to step in ordinary domains and so on illumination and street light, in 2008, already more than ten ten thousand LED street light applied in the demonstration project, the city public region illumination also already started to demonstrate applies. Beijing successively and wards off only then the alley experiment site LED street light in Zuoanmen, the street light administrative center through one-and-a-half year track test, LED in the similar illuminating effect situation, the power consumption is the incandescent lamp bulb 1/8, the fluorescent tube 1/2, may conserve energy about 40%. But because LED does not have the distribution of light, aspects and so on degree of illumination uniformity also wait for further improving. Through to other LED street light project's track investigation and study discovery, besides has the above problem, because has not been suitable for the LED street light illumination standard, the LED street light quality and the illuminating effect have the good and evil intermingled the situation, therefore choice high performance LED and the science reasonable design LED lamp becomes an important topic. Moreover because the LED technological development is very quick, the product performance enhances unceasingly, how enables the LED product through the lighting set-up the performance to obtain the full display is also achieves the better energy conservation effect the important link. the present our country about the LED product's standard, the product quality has not been irregular, the choice performance conforms to the request product and applies these products to meet the requirements the illuminating effect is the LED road lighting key is, therefore needs the product test the guarantee and the scene test confirmation, and, thus the comparison tradition street light and the LED street light system's energy consumption quantity, is the LED street light's lighting set-up and the LED street light's promoted application provides the practical reasonable suggestion, simultaneously impels the LED industry the healthy development.

收起

全部展开

In the global energy scarcity, climate change, increasingly, the energy-saving emission reduction Governments attach great importance to the response measures. Emission reduction and energy-efficient lighting by the international community recognized the implementation of energy are a successful example of sustainable development.
Lighting the current global consumption of 8.9% of its energy and 19% of electricity. According to the United States Department of Energy and Sandia National Laboratory study, along with the development of semiconductor lighting technology, lighting energy consumption and costs will be substantially reduced. Industries have become so energy-efficient LED emission reduction policies to encourage the development of the industry.
Landscape Architecture at the current LED lighting and display has been used successfully in areas such as applications, has begun to set foot in the general field of lighting and lamps, etc., in 2008, has more than 10,000 LED lamps used in demonstration projects, the city lighting public areas have also begun to demonstrate the application of . Beijing has in the left lane before安门and production pilot LED street lighting, street lighting management center of the track through the year and a half test, LED lighting effects in the same circumstances, the power consumption is one-eighth of incandescent bulbs, fluorescent tubes of the two sub - one of about 40% energy saving. However, because there is no allocation of LED light, illumination uniformity, etc. have to be further improved. LED street lamp through the works of other follow-up research found that, in addition to the above problems exist, because there is no applicable standards for LED street lighting, LED street lighting quality and lighting effects are good and evil exist, and therefore selection of high-performance LED and scientific and rational design of LED lights become an important topic. And because LED technology has developed rapidly, continuously improve product performance, how the adoption of LED lighting products designed to give full play to the performance to achieve better energy-saving effect is also an important aspect.
At present, our country has not yet Products about LED standards, uneven quality of products, the performance of select products to meet the requirements and application of these products to comply with the requirements of road lighting LED lighting effects are the key, so to ensure that the necessary product testing and field testing to verify , and thus more traditional street lamps with LED system the volume of energy consumption for LED street lighting design and the popularization and application of LED lamps provide a practical and reasonable recommendations to promote the healthy development of LED industry.

收起

全部展开

scarce in the global energy, in the climatic change remarkable situation, the energy conservation reduces the platoon to become the counter measures which day by day various countries' government takes seriously. But illuminates the energy conservation to reduce the row to recognize by the international society for is implements the energy sustainable development the successful model. the present whole world's illumination has consumed 8.9% energy and 19% electric powers. According to the United States Department of Energy and the Sandia country test chamber's memoir, along with the semiconductor lighting techniques' development, the illumination energy consumption and the cost will drop largely. Therefore the LED industry becomes the energy conservation to reduce the industry which a row of policy encourages to develop. present LED in construction domains and so on landscape illumination and demonstration obtained the success application, started to step in ordinary domains and so on illumination and street light, in 2008, already more than ten ten thousand LED street light applied in the demonstration project, the city public region illumination also already started to demonstrate applies. Beijing successively and wards off only then the alley experiment site LED street light in Zuoanmen, the street light administrative center through one-and-a-half year track test, LED in the similar illuminating effect situation, the power consumption is the incandescent lamp bulb 1/8, the fluorescent tube 1/2, may conserve energy about 40%. But because LED does not have the distribution of light, aspects and so on degree of illumination uniformity also wait for further improving. Through to other LED street light project's track investigation and study discovery, besides Beijing has only door and monarch in zuoanlu pilot LED lamp, street alley management centre half a year by the same test, LED lighting effect in the circumstances, power consumption is the incandescent light bulb one-eighth of fluorescent tubes, one half of energy, but by around 40%. But because no light, LED illumination uniformity etc remains. Based on other projects tracking investigation LED lamp, except that the question, because no applicable standards of lighting, LED lamp LED lamp lighting effects are quality and the good and bad are intermingled, so choose high scientific and rational design of LED lights LED to become an important topic. And because LED technology develops fast, continuously improve product performance, how to pass that LED lighting design product performance to achieve better adequately is the important link of the energy saving effect.
China is not about standard of LED products, product quality is uneven, select the performance requirements of product and application of these products to meet

收起

全部展开

In the global energy scarcity, climate change, increasingly, the energy-saving emission reduction Governments attach great importance to the response measures. Emission reduction and energy-efficient lighting has been recognized as the international community to implement sustainable energy development is a successful example.
Lighting the current global consumption of 8.9% of its energy and 19% of electricity. According to the United States Department of Energy and Sandia National Laboratory study, along with the development of semiconductor lighting technology, lighting energy consumption and costs will be substantially reduced. Industries have become so energy-efficient LED emission reduction policies to encourage the development of the industry.
Landscape Architecture at the current LED lighting and display has been used successfully in areas such as applications, has begun to set foot in the general field of lighting and lamps, etc., in 2008, has more than 10,000 LED lamps used in demonstration projects, the city lighting public areas have also begun to demonstrate the application of . Beijing has in the left lane before安门and production pilot LED street lighting, street lighting management center of the track through the year and a half test, LED lighting effects in the same circumstances, the power consumption is one-eighth of incandescent bulbs, fluorescent tubes of the two sub - one of about 40% energy saving. However, because there is no allocation of LED light, illumination uniformity, etc. have to be further improved. LED street lamp through the works of other follow-up research found that, in addition to the above problems exist, because there is no applicable standards for LED street lighting, LED street lighting quality and lighting effects are good and evil exist, and therefore selection of high-performance LED and scientific and rational design of LED lights become an important topic. And because LED technology has developed rapidly, continuously improve product performance, how the adoption of LED lighting products designed to give full play to the performance to achieve better energy-saving effect is also an important aspect.
At present, our country has not yet Products about LED standards, uneven quality of products, the performance of select products to meet the requirements and application of these products to comply with the requirements of road lighting LED lighting effect is the key, so to ensure that the necessary product testing and field testing to verify , and thus more traditional street lamps with LED system the volume of energy consumption for LED street lighting design and the popularization and application of LED lamps provide a practical and reasonable recommendations to promote the healthy development of LED industry.

收起

全部展开

In the global energy scarcity, climate change, increasingly, the energy-saving emission reduction Governments attach great importance to the response measures. Emission reduction and energy-efficient lighting has been recognized as the international community to implement sustainable energy development is a successful example.
Lighting the current global consumption of 8.9% of its energy and 19% of electricity. According to the U.S. Department of Energy and Sandia National Laboratory study, along with the development of semiconductor lighting technology, lighting energy consumption and costs will be substantially reduced. Industries have become so energy-efficient LED emission reduction policies to encourage the development of the industry.
At present, LED landscape lighting in the construction and display has been used successfully in areas such as applications, has begun to set foot in the general field of lighting and lamps, etc., in 2008, has more than 10,000 LED lamps used in demonstration projects, the city lighting public areas have also begun to demonstrate the application of . Beijing has in the left lane before安门and production pilot LED street lighting, street lighting management center of the track through the year and a half test, LED lighting effects in the same circumstances, the power consumption is one-eighth of incandescent bulbs, fluorescent tubes of the second sub - one of about 40% energy saving. However, due to not wearing LED light, illumination uniformity, etc. remains to be further improved. LED street lamp through the works of other follow-up research found that, in addition to the existence of the above problems, the absence of applicable standards for LED street lighting, LED street lighting effects quality and there are good and the bad, and therefore choose high-performance LED and scientific and rational design of LED lights become an important topic. And as a result of rapid development in LED technology, continuously improve product performance, how the adoption of LED lighting products designed to give full play to the performance to achieve better energy-saving effect is also an important part.
At present, China has not LED products on the standards, uneven quality of products, select products with the required performance and application of these products to comply with the requirements of road lighting LED lighting effect is the key, so the need for product testing and field testing to ensure the verification , and thus more traditional street lamps with LED system the volume of energy consumption for LED street lighting design and the popularization and application of LED lamps provide a practical and reasonable recommendations to promote the healthy development of LED industry.

收起